PLAT REQUIREMENTS:
The preliminary plat shall be drawn to a scale not smaller than one hundred feet to an inch (1" = 100'), and shall be on standard twenty four inch by thirty six inch (24" x 36") paper. The plat shall show:
1. The proposed name of the subdivision (there shall be no duplication of subdivision names in the city).
2. Its location as forming part of a larger tract or parcel, where the plat submitted covers only a part of the subdivider's tract on only a part of larger vacant area. In such a case, a sketch of the prospective future street system of the part submitted shall be considered in light of adjustments and connections with the future street system of the larger area. The preliminary plat shall show all property owned or optioned by the subdivider pertaining to the proposed subdivision at hand.
3. Sufficient information to locate accurately the property shown on the plat. The nearest section corner tie must be shown, also, a copy of the county ownership plat is to be submitted.
4. The names and addresses of the subdividers, the engineer or surveyor of the subdivision, and the owners of the land immediately adjoining the land to be subdivided shall be shown on the preliminary plat.
5. Contours at five foot (5') intervals to show topography of the land shall be shown.
6. The boundary lines of the tract to be subdivided, including total acreage proposed for subdivision.
7. The location, widths and other dimensions of all existing or platted streets and other important features such as easements, railroad lines, watercourses (including irrigation canals and ditches) exceptional topography, bridges and buildings within or immediately adjacent to the tract to be subdivided.
8. Existing power lines, sanitary sewer, storm drains, water supply mains and culverts within the tract and immediately adjacent thereto.
9. The flood hazard boundary (federal flood insurance administration), if required.
10. The locations, widths and other dimensions of proposed public streets, private streets, alleys, utility easements, parks, other open spaces and lots, with proper labeling of spaces dedicated to the public, or designed as private streets.
11. Buffer zones where non compatible uses adjoin a proposed subdivision.
12. North point, scale and date.
13. A review copy of proposed protective covenants.
14. A statement of the existing zoning and conformance with the master plan.
15. A preliminary storm drainage study, with schematic solutions and the associated calculations.
16. The proposed layout, dimension and number of each lot.
17. Proposed construction and permanent fencing along appropriate subdivision boundaries as determined by the planning commission. The fencing shall be as indicated in the subdivision standards.
18. Plans or written statements regarding the proposed storm water drainage facilities and other proposed special improvements such as sidewalks, planting and parks, and any grading of individual lots. (Ord. 86-3, 3-11-1986)